IOT communication products and total solution services
Chip：CC1352R
Frequency：Zigbee3.0+Sub1G
TX Power：+14dBm
Antenna：IPEX
Distance：1KM
Dimension：26.5*16.8mm
Feature：Zigbee3.0+Sub1G
Product introduction：RC1352A is an RF module based on TI lower-power SoC CC1352R. It integrates a 48 MHz and a 32.768 KHz crystals, a 256 KB ROM, a 352 KB Flash, and two IPEXs to guarantee the external antenna connection. Its ARM® Cortex®-M4Fcore application processor can operate at extremely low current at flexible power modes.
RC1352A is an RF module based on TI lower-power SoC CC1352R. It integrates a 48 MHz and a 32.768 KHz crystals, a 256 KB ROM, a 352 KB Flash, and two IPEXs to guarantee the external antenna connection. Its ARM® Cortex®-M4Fcore application processor can operate at extremely low current at flexible power modes.
| 脚位 | 名称 | 功能 | 备注 |
| Pin1 | P03 | GND | GPIO, Sensor Controller |
| Pin2 | P04 | SYS_POWER | GPIO, Sensor Controller |
| Pin3 | P05 | GPIO | GPIO, Sensor Controller, high-drive capability |
| Pin4 | P06 | GPIO | GPIO, Sensor Controller, high-drive capability |
| Pin5 | P07 | GPIO | GPIO, Sensor Controller, high-drive capability |
| Pin6 | P08 | GPIO | GPIO |
| Pin7 | P09 | GPIO | GPIO |
| Pin8 | P10 | GPIO | GPIO |
| Pin9 | P11 | GPIO | GPIO |
| Pin10 | P12 | GPIO | GPIO |
| Pin11 | P13 | GPIO | GPIO |
| Pin12 | P14 | GPIO | |
| Pin13 | P15 | GPIO | GPIO, JTAG_TDO, high-drive capability |
| Pin14 | VDD | 电源正极输入 | 模块电源，2.0~3.6V，推荐3.3V |
| Pin15 | GND | 模块地 | |
| Pin16 | TMS | 输入 | JTAG_TMS |
| Pin17 | TCK | 输入 | JTAG_TCK |
| Pin18 | RES | 复位脚 | 芯片复位脚，低电平有效 |
| Pin19 | P16 | GPIO | GPIO, JTAG_TDI, high-drive capability |
| Pin20 | P17 | GPIO | GPIO |
| Pin21 | P18 | GPIO | GPIO |
| Pin22 | P19 | GPIO | GPIO |
| Pin23 | P20 | GPIO | GPIO |
| Pin24 | P21 | GPIO | GPIO |
| Pin25 | P22 | GPIO | GPIO |
| Pin26 | P23 | GPIO | GPIO, Sensor Controller, analog |
| Pin27 | P24 | GPIO | GPIO, Sensor Controller, analog |
| Pin28 | P25 | GPIO | GPIO, Sensor Controller, analog |
| Pin29 | P26 | GPIO | GPIO, Sensor Controller, analog |
| Pin30 | P27 | GPIO | GPIO, Sensor Controller, analog |
| Pin31 | P28 | GPIO | GPIO, Sensor Controller, analog |
| Pin32 | P29 | GPIO | GPIO, Sensor Controller, analog |
| Pin33 | P30 | GPIO | GPIO, Sensor Controller, analog |
| Pin34 | GND | 模块地 | |
| Pin35 | 2G4-OUT | 射频输出 | 2.4G 天线输出引脚 |
| Pin36 | GND | 天线地 | |
| Pin37 | SUB-OUT | 射频输出 | Sub G 天线输出引脚 |
| Pin38 | GND | 天线地 |
简体中文
English