Chip:TI CC2540
TX Power:+4dBm
Antenna:PCB
Distance:100m
Dimension:15*11mm
Feature:Low cost
Product introduction:RC2541B Bluetooth module is a low-power Bluetooth (ble) RF module based on CC2540 chip of TI company, It has the characteristics of low power consumption, small size, long transmission distance and strong anti-interference ability. The module is equipped with high-performance serpentine antenna, and the module is designed with half hole hardware interface.
CC2540 RC2541B New low energy 4dBm 50m 2.4GHz BLE 4.0 Bluetooth RF Module
RC2541B is a Bluetooth Low Energy (BLE) module based on TI CC2540F256, an 8051 core BLE System-on-Chip (SoC). This PCB module integrates a 32 MHz crystal, a 32.768 kHz crystal, an LC balun, an RF matching filter, and a meander line PCB antenna. It is pre-programmed with the BLE 4.0 stack and an application communication protocol over its full speed USB interface. It can be used to design a USB dongle to easily establish BLE connection from a device to smart phones. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption.
Table 1. The Pin Functions of RC2541B
Pin | Name | Chip Pin | Pin Type | Description |
1 | GND | - | Power | GND |
2 | VCC | - | Power | Power supply 2.0 V ~ 3.6 V |
3 | P22 | P2.2 | I/O | |
4 | P21 | P2.1 | I/O | |
5 | RESET | RST | RESET | |
6 | P20 | P2.0 | I/O | |
7 | P17 | P1.7 | I/O | |
8 | USB_P | USB+ | USB+ | USB+ |
9 | USB_N | USB- | USB- | USB- |
10 | P12 | P1.2 | I/O | |
11 | P11 | P1.1 | I/O | |
12 | P07 | P0.7 | I/O | |
13 | P06 | P0.6 | I/O | |
14 | P05 | P0.5 | I/O | |
15 | P04 | P0.4 | I/O | |
16 | P03 | P0.3 | I/O | |
17 | P02 | P0.2 | I/O | |
18 | P01 | P0.1 | I/O |