RC1310B CC1310 868/915/920MHz  2.4ghz 1km outdoor wireless transmitter and receiver module

Sub 1GHz module RC1310B is based on CC1310 from TI,which embeded ARM Cortex-M3 +ARM Cortex-M0,main MCU ARM Cortex-M3 charges application layer,ARM Cortex-M0 charges wireless data transmission,M3+M0 make CC1310 integrate low cost and low power consumption in Sub 1GHz.

RC1310B is designed for low power consumption and long wireless comunication

applications,such as instruments and meters,logistics tracking,health and medical care,building automation,motion measurement,auto electronics,toys,agricultural monitoring and so on.Users can integrat this module into their products or solutions.

RC1310B embeded in transparent transmission firmware,the default baud rate is 115200,8 data bits,no parity check bit,1 stop bit.Default RF parameters are:the transmitting terminal device address:0xAA;the receiving terminal device address:0xAA;band parameters:433MHz;transmitting power parameter:14dbm;MAC rate:50Kbps.When module start work,serial ports will print “Application Start\r\n”,and default start mode is transparent transmission mode,serial ports will transmit all the data except “+++”.

l Module Features

Chip:CC1310

Low power consumption

Long wireless communication applications

Abundant AT command

Ultra-Low-Power Sensor Controller

All Digital Peripheral Pins Can Be Routed to Any GPIO

Programmable Current Source

The CC1310 device is a cost-effective, ultra-low-power, Sub-1 GHz RF device fromTexas Instruments™ that is part of theSimpleLink™ microcontroller (MCU) platform.

The platform consists of Wi-Fi®, Bluetooth® low energy, Sub-1 GHz, Ethernet,Zigbee®, Thread, and host MCUs. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set. A one-time integration of the SimpleLink platform enables users to add any combination of devices from the portfolio into their design, allowing 100 percent code reuse when design requirements change.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the CC1310 device provides excellent battery life and allows long-range operation on small coin-cell batteries and in energy harvesting applications.

The CC1310 is a device in the CC13xx and CC26xx family of cost-effective, ultra-low-power wireless MCUs capable of handling Sub-1 GHz RF frequencies. The CC1310 device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance;

The CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.

The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC/DC converter.

l AT commands

AT command start character: all AT commands must start with "AT" characters, can be

capitalized;

Command delimiter: "AT" start character and the command type of the separator, fixed as "#"

character;

AT command type: such as: "RF", "UART", can be capitalized;

Parameter separator: used to separate the command type and configuration parameters or separate

multiple configuration parameters, fixed to a space bar;

Parameter start character: The configuration parameter start character, which indicates the start

character of the configuration parameter, is fixed to "-";

...

 AT commands and parameters description 

 Serial parameters query / setup command 

l Packaging size and Pins

l Applications

Instruments and meters

Logistics tracking

Health and medical care

building automation

motion measurement

Auto electronics,toys,agricultural monitoring and so on

l Packaging&Delivery&FAQ  

Q:Are you the original factory?

 A: Yes,this module designed&developed&produced by our company(RF-star).We have our own SMT production lines, R&D team, FAE team, and sales team. 

n write the module with the APP. And

Q: How am I sure about the quality?

A:1-All RF-crazy products are assured to be authentic and built upon tier 1 component vendors.

  2-Our facility is ISO9001 and ISO14000 certified.

  3-Our former shipment underwent severe test of FCC, CE/CB, ETSI, ARIB, RoHS and REACH.

  4-All of our products are subject to the complete QA processes such as DQA, SQA, IQC and OQC etc.

  5-Our after-market service system also reserved optimal mechanism to ensure any quality issue

floated after shipment to be addressed promptly.blue

to write codes for the master CPU of the module and to 

Q: Do you provide OEM service? transceiver module digital power amplifier module smart home automation

A: RF-crazy is open to such business. Clients would be appreciated for providing detailed requirement

documents for review in the very beginning.mo

 low cos

Q: Any other service?module amplifier 433.92mh

A: 1-Technical advisory service 1km wireless transmitter and receiver module smart watch module  receiver 

     2-Ready-made communication and sensing modules amplifier module 2.1 power am

     3-RF design, hardware and software development am me 

     4-Development kit and reference design module radio wireless module 433mhz r

   f 5-Test equipment and testing solution advisory